Monday, November 1, 2010

TECHNOSAT




TECNOSAT T-888 FTA



1. Press ?EXIT? button & ?6108? through RCU

(Remote Control Unit), activate patch.

2. Then go to Menu Parental Lock Input Password ?0000?.

3. Pay Channel Lock Status has to be ?OFF"

for the Scrambled Channels to work.

Method to change the key codes:

To view the Code Menu, go to Menu Information Code Edi

t. To update codes press ?EXIT &

8088? through RCU (Remote Control Unit).

Multi-picture Option:

Press ?Blue? button, Multi PIG with 9 pictures made available.



===============================================

Patch activation -Technosat Bodyguard 555



Procedure To Activate & De-activate Patch Software

Steps to activate the patch:

Go to Menu Press Red, Green, Yellow and Blue color button.

Lock Menu appears with Lock Status -

Pay Channel Lock Status -

1. Always off

2. On

3. Off

? Select Always off option for the emulation to be active even after the power chord is

removed

? Select Off option for the emulation to be active, but this becomes inactive once the power

chord is removed

? Select On option for the emulation to be inactive

How to get Multi Picture Option?

Please select sort button through remote to get this option

Three options appear:

4 Channels

9 Channels

16 Channels

Select appropriately

.===============================================

Technosat T-1100 Plus FTA Receiver



Procedure To Activate Patch Software On T-1100 Plus FTA Receiver

Pre-Requist:

1. The Software version should be greater or equal to 5.0.

2. The last 4 digit of manufacturing serial no. of the receiver should be above 6000.

Note: Check the serial no. barcode on the back panel of the receiver.

Steps to activate the patch :

# There are basically two Methods to activate the Software patch ?

Method 1 ?

1. Goto Menu User Installation Parental Lock Current password Press

?9911? from the RCU.

2. After pressing ?9911?, you can see a RED color button on the bottom will appear.

Which indicates the patch is enabled and can watch the scrambled channels.

Method 2 ?

1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.

2. Just Press ?9911? keys from the RCU.

3. The patch is activated.

Note: Once the patch is activated the emulation Software will keep working even after

the receiver is switched ?OFF? and turned ?ON? again. The only way to deactivate the

emulation Software is to bring receiver to Factory Default

=============================================

Technosat 2000Ultra



Activation of Emulation

Go to Menu and type 5400, emulation is made active with the display of Code Edit

Option in the Menu and vice versa for deactivation. To view the codes , press yellow

button from the remote .

Universal Password : 6789

===============================================

TECHNOSAT\5200FTA



Procedure To Activate Patch Software On T-1100 Plus FTA Receiver

Pre-Requist:

1. The Software version should be greater or equal to 5.0.

2. The last 4 digit of manufacturing serial no. of the receiver should be above 6000.

Note: Check the serial no. barcode on the back panel of the receiver.

Steps to activate the patch :

# There are basically two Methods to activate the Software patch ?

Method 1 ?

1. Goto Menu User Installation Parental Lock Current password Press

?9911? from the RCU.

2. After pressing ?9911?, you can see a RED color button on the bottom will appear.

Which indicates the patch is enabled and can watch the scrambled channels.

Method 2 ?

1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.

2. Just Press ?9911? keys from the RCU.

3. The patch is activated.

Note: Once the patch is activated the emulation Software will keep working even after

the receiver is switched ?OFF? and turned ?ON? again. The only way to deactivate the

emulation Software is to bring receiver to Factory Default

===============================================

TECHNOSAT\6000Plus_PVR



Procedure To Activate & De-activate Patch Software

Steps to activate the patch:

# There are basically two Methods to activate the Software patch ?

Method 1 ?

1. Goto Menu User Installation Parental Lock Current password Press ?9911? from

the RCU.

2. After pressing ?9911?, you can see a RED color button on the bottom will appear. Which

indicates the patch is enabled and can watch the scrambled channels.

Method 2 ?

1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.

2. Wait till you see on ?0000: Scrambled? message on the right-top corner of the TV screen.

3. Then, Press ?9911? keys from the RCU.

4. The patch is activated.

Note: Once the patch is activated the emulation Software will keep working even after the

receiver is switched ?OFF? and turned ?ON? again.

Conditional Access System:

If you need to watch channels using any original Smart Cards (Like Irdeto, Viaccess,

Mediaguard, Nagravision, etc.) on the embedded slot you need to De-activate the emulation

Software (patch) to allow the embedded slot to function correctly with the original Smart Card.

Steps to de-activate the patch:

# There are basically two Methods to de-activate the Software patch ?

Method 1 ?

3. Goto Menu User Installation Parental Lock Current password Press ?9911? from

the RCU.

4. After pressing ?9911?, you can see a RED color button on the bottom will disappear.

Which indicates the patch is disabled and you cannot watch the scrambled channels.

Method 2 ?

5. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.

6. Then, Press ?9911? keys from the RCU.

7. The patch is de-activated.

Note: Once the patch is de-activated the emulation Software will not work even after the

receiver is switched ?OFF? and turned

No comments:

Post a Comment